job board listings

APPRENTICE ELECTRICIAN

Platteville, CO 80651

Job ID: 868934 Industry: Skilled Trades

Looking for 2nd 4th year electricial apprentices.


JOB TITLE: APPRENTICE ELECTRICIAN

SCOPE OF WORK:

A. Work will consist of installation, alterations, additions and/or repairs of electrical systems, conductors and associated materials and equipment within the commercial, industrial and residential electrical industry. Must complete 2, 000 hours of on-the-job training each year of apprenticeship.

B. Must attend 144 hours of classroom instruction in each year of apprenticeship training and maintain a minimum passing grade of 70. There are four years of apprenticeship training and study.

C. Must be BAT registered.

RESPONSIBILITIES:

Perform routine tasks under direct supervision. Demonstrate knowledge of electrical material and tools. Demonstrate safe working habits and proper care of tools and equipment.

1. Conduit bending and installation.

2. Quality installation of trim-out.

3. Know wire pulling procedures.

4. Knowledge of tools and materials.

5. Wall rough-in. 6 Fixture rough-in.

7. Possess skills of first year apprentice.

8. Attend a 4 hour instructional class one night each week.



POSITION REQUIREMENTS: LICENSES: Current Driver's License and have own transportation, (most job sites are not always served by public transportation). Electrical license - None EDUCATION: High School Graduate, holder of GED, or equivalent training. Must have completed requirements for First Year Apprentice. EXPERIENCE: One year of previous electrical experience (commercial /industrial)

WORKING CONDITIONS:

1. Job requires working in all elements, depending on job location, inside and outside, time of year, heat, cold, rain or snow.

2. Must be able to utilize construction site sanitary facilities (Porta-Johns).

3. Employee must have required personal tools with him at all times (waist tool belt as worn weighs approximately 30 lbs.)

4. Work from all type ladders up to 14', "A" frame ladders and all size extension ladders: carry and relocate up to 12' step ladder by one's self.

5. Employee's personal weight and personal tools cannot exceed weight limit of ladder (Class 1 - 250 lbs., Class 2 - 300 lbs.).

6. Perform work at various heights, up to 90' from ladders, scaffolds, aerial lifts, cat walks or other safe work areas.

7. Work in restricted areas (switchgear room, manholes, utility tunnels, crawl spaces, attics).

8. Wear personal protective equipment (hard hat, safety glasses at all times), respirator when required.

9. Repetitive use of arms, hands and fingers.

10. Able to work 8 hours per day, 40 hours per week, overtime as required and night shifts if required.

11. Operate and work from mechanical personnel lifts (electric or gas powered).

SKILLS:

1. Positively identify colors of wires.
2. Comprehend reading and drawing prints and schematics of same.

3. Bend conduit by hand with hand benders.

4. Must use all power tools, saws, threaders, wire tuggers, hydraulic benders and knockout punches.

5. Capable of digging trenches, either by use of hand tools or power equipment.

6. Practice and comprehend safe work procedures as outlined in Company Safety Policy Handbook, Haz-Com Policy, and Lockout/Tagout Policy.

7. Operate equipment, trenchers, back hoe, lift trucks in a safe manner.

8. Operate two (2) handed tools/equipment, cable cutters, hammer drills, compression tools, jack hammers.

9. Operate company trucks with manual and automatic transmission.

10. Read and interpret maps, instructional manuals, specifications, work site directions, blue prints and written instructions. 11. Operate and work from mechanical personnel lifts (electric or gas powered).



JOB TITLE: APPRENTICE ELECTRICIAN THIRD YEAR

SCOPE OF WORK:

A. Work will consist of installation, alterations, additions and/or repairs of electrical systems, conductors and associated materials and equipment within the commercial, industrial and residential electrical industry. Must complete 2, 000 hours of on-the-job training each year of apprenticeship.

B. Must attend 144 hours of classroom instruction in each year of apprenticeship training and maintain a minimum passing grade of 70. There are four years of apprenticeship training and study. C. Must be BAT registered.

RESPONSIBILITIES: Demonstrate basic knowledge of conduit bending and wire pulling. Perform simple tasks, install all sizes of conduit with general supervision. Demonstrate basic knowledge of blueprint reading. Perform assigned tasks in a safe manner and demonstrate proper care of tools and equipment.

1. Terminate junction boxes

2. Pull wire

3. Install conduit - Branch

4. Install conduit - Feeder

5. Fixture connections and rough-in

6. Underground rough-in methods . Possess skills of first and second year apprentice

8. Attend a 4 hour instructional class one night each week.

9. Begin to demonstrate leadership skills in training of 1st & 2nd Year apprentices.



POSITION REQUIREMENTS: LICENSES: Current Driver's License and have own transportation, (most job sites are not always served by public transportation). Electrical - None EDUCATION: High School Graduate, holder of GED, or equivalent training. Must have completed requirements for second year apprentice. EXPERIENCE: 2 years of previous electrical experience (commercial/industrial)

SKILLS: 1. Positively identify colors of wires.

2. Comprehend reading and drawing prints and schematics of same

3. Bend conduit by hand with hand benders.

4. Must use all power tools, saws, threaders, wire tuggers, hydraulic benders, and knockout punches.

5. Capable of digging trenches, either by use of hand tools or power equipment.

6. Practice and comprehend safe work procedures as outlined in Company Safety Policy Handbook, Haz-Com Policy and Lockout/Tagout Policy.

7. Operate equipment, trenchers, back hoe, lift trucks in a safe manner.

8. Operate two (2) handed tools/equipment, cable cutters, hammer drills, compression tools, jack hammers.

9. Operate company trucks with manual and automatic transmission.

10. Read and interpret maps, instructional manuals, specifications, work site directions, blue prints and written instructions.

11. Operate and work form mechanical personnel lifts (electric or gas powered).


JOB TITLE: APPRENTICE ELECTRICIAN FOURTH YEAR

SCOPE OF WORK:

A. Work will consist of installation, alterations, additions and/or repairs of electrical systems, conductors and associated materials and equipment within the commercial, industrial and residential electrical industry. Must complete 2, 000 hours of on-the-job training each year of apprenticeship.

B. Must attend 144 hours of classroom instruction in each year of apprenticeship training and maintain a minimum passing grade of 70. There are four years of apprenticeship training and study. C. Must be BAT registered.

RESPONSIBILITIES:

Demonstrate thorough knowledge of all skills generally attributed to an upper level Apprentice. Possess motivation to accomplish tasks with general supervision. Take proper care of tools and equipment. Demonstrate safe and orderly work habits.

1. Basic blueprint knowledge

2. Layout from field sketches

3. Panel termination

4. Size conduit and boxes

5. Controls - familiarize

6. Transformer terminations

7. Motor terminations

8. Underground rough-in materials

9. Possess skills of third year apprentice

10. Possess job knowledge to assist journeyman on jobsite in the training of 1st and 2nd, year apprentices.

11. Attend a 4 hour instructional class one night each week.


POSITION REQUIREMENTS: LICENSES: Current Driver's License and have own transportation, (most job sites are not always served by public transportation). Electrical - None EDUCATION: High School Graduate, holder of GED, or equivalent training. Must have completed requirements for third year Apprentice. EXPERIENCE: Have 3 years of previous electrical experience (commercial/industrial)


SKILLS:

1. Positively identify colors of wires.

2. Comprehend reading and drawing prints and schematics of same

3. Bend conduit by hand with hand benders.

4. Must use all power tools, saws, threaders, wire tuggers, hydraulic benders, and knockout punches.

5. Capable of digging trenches, either by use of hand tools or power equipment.

6. Practice and comprehend safe work procedures as outlined in Company Safety Policy Handbook, Haz-Com Policy, and Lockout/Tagout Policy.

7. Operate equipment, trenchers, back hoe, lift trucks in a safe manner.

8. Operate two (2) handed tools/equipment, cable cutters, hammer drills, compression tools, jack hammers.

9. Operate company trucks with manual and automatic transmission.

10. Read and interpret maps, instructional manuals, specifications, work site directions, blue prints and written instructions.

11. Operate and work form mechanical personnel lifts (electric or gas powered).




Please apply to anila@employmentsolutions.Com


About Employment Solutions Employment Solutions is a leader in the Colorado and Ohio staffing industry and has been providing high-quality employee to employer matches in the skilled manufacturing, logistics, warehouse, labor, production and administrative sectors since 1994. Employment Solutions has exclusive access to Colorado and Ohio's top employers. With offices in Denver, Fort Collins, Greeley and Longmont, and Columbus Ohio, we can help you find a job to take your career further. Employment Solutions offers top wages, weekly pay, health benefits and bonuses. To have jobs that fit your requirements delivered to your Inbox, Join our Talent Network at www.Employmentsolutions.Com. Employment Solutions is your source for temporary, temp-to-hire and direct-hire employment. Warehouse, Assembly, Production, Days, Manufacturing, Industrial, General Labor, Full-Time, 1st shift, first shift, Warehouse Labor, General Labor, laborer, assembler, production, Fort Collins, Ft Collins, FC, Woodworking, Lumber, Fabrication, Wood
Apply Online

Not ready to apply?

Send an email reminder to:

Share This Job:

Related Jobs: